Battery charger TBC3i PRO 30/20/250

Innovative TBC3i battery chargers offer outstanding construction quality and have a particularly light, compact design that helps save valuable space inside the camper.
Wiring and connections have been minimised to make installation fast and simple.
TBC3i battery chargers consist of a combination of latest-generation units; these include a mains battery charger, a charge converter from the alternator and a charge regulator with MPPT technology for solar panels, ensuring there is always an energy source in the camper.
Batteries are always charged automatically, both during the standby or when driving.
Depending on the model, the integrated charge converter always ensures a complete recharge during both short and, of course, long trips.
All of them have an integrated system to maintain battery charge even during long periods of storage and have eight different charge curves for lead-acid, AGM, GEL and LiFePO4 batteries.
Their LCD displays have been specially developed for these units and show all the key information.
These battery chargers are compatible with all car park charging units
Supplied: 230 V AC mains cable, 825 temperature sensor, Manual
Image
Technical features
 
TBC3i PRO 30/20/250
Operation from mains AC
Rated voltage (AC) 110 V - 230 V / 45 - 65 Hz
Operating range (AC) 90 V - 270 V (max. 305 V, for 5 sec)
Max. absorbed current (AC) 360 W
Service / Start battery charge current 20 A / 4 A
AC Power Limit function Si
Charge Converter 12 V/12 VVoltage Max 
Service Battery Charger current 30 A
Automatic D+ activation Si
Start battery/Alternator Voltage (Euro 6) /
Max. current.
10.5 - 16.5 V / 42 A
Max. current II limit (settable) 25 A
MPPT Solar Regulator
Solar Module Power (Pmax) 50 - 250 Wp
Solar Module max. current 15 A
Solar Module max. voltage 36 V
Start / Service max. battery charger current 18.0 / 4.0 A
AES cooling terminal Si
Starter Battery
Rated Voltage / Min. recommended capacity 12 V / >60 Ah
Service Battery, IU1oU2oU3
Lead-acid / LiFePO4 voltage 12 V / 12.0 - 13.3 V
Battery capacity (settable) 45 - 280 Ah
Specifications
N. of charge programmes for Lead-Acid / Gel / AGM battery 4
N. of charge programmes for LiFePO4 battery 4
Start / Service battery voltage sensors 4
Temperature compensation (Lead-Acid) / Protection (LiFePO4) Yes
Automatic regeneration (Lead-Acid / Auto Wake Up (LiFePO4) Yes
Battery Trainer (Pulser) for Lead-Acid Service Battery, can be activated Yes
LiFePO4 control input – BMS for charge stop Yes
Assembly position All
Operating Temperature -20 to +45 °C
Variable-speed fan, temperature-controlled Yes
Gradual charge reduction for Overheating Yes
Safety Disconnect in the event of Overheating Yes
Waterproof rating IP 21
Environmental conditions Max 95% RH, No Condensation
Dimensions (LxDxH) - incl. assembly flange, without connections 217 x 250 x 85 mm
Weight 2700 g

LCD control panel for TBC3i PRO 30/20/250 battery charger

TCP3i PRO is a control panel that displays the status of the individual power sources, starter battery voltage, service battery voltage and instantaneous charge current. When the solar module is working the display shows instantaneous solar power (W) and energy values (Wh and Ah).
Charging from the AC mains can be activated or deactivated manually or AC Power Limit can be reduced (e.g. in countries where the mains dove protection current is particularly low. A special protection function ensures AC mains charging is reactivated if the service battery is at risk of running completely flat.
The display is illuminated and ensures excellent legibility while consuming very little power.
Assembly is made easy by plug-and-play connection and can be also be completed after installation of the battery charger
The compact design makes it ideal for installation in any part of the vehicle.
Supplied: attachment screws, manual, drilling template, 5 m cable
Image
Technical features
 
 
Charge phase / Current, Service / Start battery voltage Yes
AC-Mode (ON / OFF / Limit) Yes
Solar computer Yes
Power consumption 3 – 30 mA
Backlight can be deactivated Yes
Dimensions (HxLxD) 85x80x24 mm
Assembly hole dimensions 70x65x22 mm 
Weight 55 g