The TEB310AL is an analog/digital control unit fitted with a 230 Vac / 12 Vdc battery charger, designed to power all the 12 Vdc electrical appliances in a motorhome.
The electronic control unit is fitted with a digital control module which has the following functions:

• Charging of all connected batteries via the 230 V AC mains supply: service battery (up to 20 Ah) and starter battery (6 A max.)
• Distribution of current to connected 12 V loads
• Fuse protection for connected 12 V loads
• Monitoring of battery voltage and charge level (LITHIUM only) via the TP310A panel
• Recharging of the service battery as well as the starter battery while driving (via the alternator)
• Charging battery via an external solar panel
• Disconnection of all loads from the battery when the vehicle is in storage, by simply operating the dedicated switch.
• Charging selector for 4 battery types: LITHIUM, AGM, ACID, GEL
• CI BUS connector that connects the lithium batteries (of the latest generation) to the TP310A panel to monitor their charge level
• Automatic cut-off device for electrical loads if the battery voltage drops below 11.00 Vdc
• Automatic switching device for AES fridge / compressor fridge. While the vehicle is moving, the control unit powers the fridge from the starter battery. When the vehicle is parked, the fridge is powered by the service battery.
• 3-way connector for connecting the service battery and the starter battery
• Compact and lightweight design (H x W x D) 130 x 270 x 170.5 mm. Weight 1700 g
• Certifications EC R10

CONTROLS:

• Service battery
• Clear water
• Waste water
• ON – OFF
• Mains connections
• Dimensions (W x H x D) 150 x 95 x 10 mm
• Construction: PCA wall-mounting bracket with screws and interlocking mechanism + toughened glass

The TEB310ALF is an analogue/digital electronic control unit fitted with a 230 V AC / 12 V DC battery charger
which is designed to supply power to all the required 12 V DC electrical appliances in a motorhome.
The electronic control unit is fitted with a digital control module that performs the following functions:

• Charging of all connected batteries via the 230 V AC mains supply: service batteries (up to 20 A/h) and starter batteries (6 A max.)
• Distribution of current to connected 12 V loads
• Fuses to protect connected 12 V loads
• Monitoring of battery voltage and charge level (LITHIUM only) via the TP310ALF panel
• Recharging of the service battery as well as the starter battery whilst driving (via the alternator)
• Battery charging via an external solar panel.
• Disconnection of all loads from the battery, by operating the dedicated switch, during storage.
• Charging selector for 4 battery types: LITHIUM, AGM, ACID, GEL
• CI BUS connector, to be connected to LITHIUM batteries (latest generation) to display their charge level directly on the TP310A panel
• Automatic shut-off device for electrical loads if the battery voltage drops below 11.00 Vdc
• Automatic switching device for AES fridge / compressor fridge. Whilst the vehicle is in motion, the control unit powers the fridge from the starter battery. When the vehicle is stationary, the fridge is powered by the service battery.
• RJ10 connector for connecting the TEB310P touchscreen control panel using a simple 4-pin cable.
• Connectors for connecting fresh water and waste water tanks
• 4-way connector for connecting the service battery and starter battery
• Compact and lightweight design (H x W x D) 130 x 270 x 170.5 mm. Weight 1700 g
• Certifications EC R10

CONTROLS:

• Engine battery and charging
• Interior and exterior lights
• Fresh water
• Waste water
• Water pump
• ON – OFF
• Mains connections
• Dimensions (W x H x D) 150 x 95 x 10 mm
• Construction: PCA wall-mounting bracket with screws and interlocking mechanism + toughened glass

The TEB310D is an analogue/digital electronic control unit fitted with a 230 V AC / 12 V DC battery charger
which is designed to supply power to all the required 12 V DC electrical appliances in a motorhome.
The electronic control unit is fitted with a digital control module that performs the following functions:

• Charging, via the 230 V AC mains supply, of all connected batteries: service batteries (up to 20 A/h) and starter batteries (6 A max.)
• Distribution of current to connected 12 V loads
• Fuses to protect connected 12 V loads
• Monitoring of battery voltage via the TP310D panel
• Recharging of the service battery as well as the starter battery whilst driving (via the alternator)
• Charging of batteries via an external solar panel.
• Disconnection of all loads from the battery, by operating the appropriate switch, during storage.
• Charge selector for 4 battery types: LITHIUM, AGM, ACID, GEL
• Connectors: 1x CI BUS, 2x CAN Bus for transmitting information to a compatible digital display, including those from other manufacturers (on request)
• Automatic load shut-off device if the battery voltage drops below 11.00 Vdc
• Automatic switching device for AES fridge / compressor fridge. Whilst the vehicle is in motion, the control unit powers the fridge from the starter battery. When the vehicle is stationary, the fridge is powered by the service battery.
• RJ10 connector for connecting the TEB310P touchscreen control panel using a simple 4-pin cable.
• Connectors for connecting fresh water and waste water tanks
• 3-way connector for connecting the service battery and starter battery
• Compact and lightweight design (H x W x D) 130 x 270 x 170.5 mm. Weight 1700 g
• Certifications CE R10

CONTROLS:

• Service panel
• Fresh water
• Waste water
• ON - OFF
• Mains connections
• Dimensions (W x H x D) 150 x 95 x 10 mm
• Construction: PCA wall-mounting bracket with screws and interlocking mechanism + toughened glass