TEB310ALP Analogue
Electronic control unit to control a camper with battery charger, connectors and fuses
The TEB310ALP is an analogue/digital electronic control unit equipped with a 230 V AC / 12 V DC battery charger that powers all the 12 V DC appliances in a camper.
The electronic control unit has a digital control module that performs the following functions:
The electronic control unit has a digital control module that performs the following functions:
- Charges all connected batteries - service (up to 20 A/h) and starter (6 A max.) - via the 230 V AC mains
- Distributes power to connected 12 V appliances
- Protection fuses for connected 12 V appliances
- Controls battery voltage and charge level (LITHIUM only) from the TEB310P panel
- Also charges the service battery and starter battery while driving (alternator)
- Charges batteries via external solar panel
- Disconnects all loads from the battery by acting on the appropriate switch, in case of storage
- Charge selector for 4 battery models: LITHIUM, AGM, ACID, GEL
- CI BUS connector, to be connected to LITHIUM batteries (latest generation) to display
- the charge level directly on the TEB310P panel
- Automatic switch-off device for appliances if battery charge drops below 11.00 V DC
- Automatic switching device for AES refrigerator / compressor refrigerator When the vehicle is on the move the control unit powers
- the refrigerator from the starter battery When the vehicle is stationary, the refrigerator is powered by the service battery
- RJ10 connector to connect the TEB310P Touch control panel with a simple 4-pin cable
- Connectors for connecting clean water and waste water tanks
- 3-way connector to connect the service battery, starter battery and TBooster (DC/DC Converter)
- Compact, lightweight structure (H x L x D) 130 x 270 x 170.5 mm. Weight 1700 g
- Easy access to fuses (all on front panel)
- Certifications EC R10
TEB310DP Digital
Electronic control unit to control a camper with battery charger, connectors and fuses
The TEB310DP is an analogue/digital electronic control unit equipped with a 230 V AC / 12 V DC battery charger that powers all the 12 V DC appliances in a camper.
The electronic control unit has a digital control module that performs the following functions:
The electronic control unit has a digital control module that performs the following functions:
- Charges all connected batteries - service (up to 20 A/h) and starter (6 A/h max.) - via the 230 V AC Mains
- Distributes power to connected 12 V appliances
- Protection fuses for connected 12 V appliances
- Controls battery voltage and charge level (LITHIUM only) from the TEB310P panel
- Also charges the service battery and starter battery while driving (alternator)
- Charges batteries via external solar panel
- Disconnects all loads from the battery by acting on the appropriate switch, in case of storage
- Charge selector for 4 battery models: LITHIUM, AGM, ACID, GEL
- CI BUS connector to be connected to LITHIUM batteries (latest generation) to display the charge level directly on the TEB310P panel
- 2 x CAN Bus connectors to send information to a compatible digital panel, even if made by another manufacturer (on request)
- Automatic switch-off device for appliances if battery charge drops below 11.00 V DC
- Automatic switching device for AES refrigerator / compressor refrigerator When the vehicle is on the move the control unit powers
- the refrigerator from the starter battery When the vehicle is stationary, the refrigerator is powered by the service battery
- RJ10 connector to connect the TEB310P Touch control panel with a simple 4-pin cable
- Connectors for connecting clean water and waste water tanks
- 3-way connector to connect the service battery, starter battery and TBooster (DC/DC Converter)
- Compact, lightweight structure (H x L x D) 130 x 270 x 170.5 mm. Weight 1700 g
- Easy access to fuses (all on front panel)
- Certifications EC R10
TEB310P
Touch control panel
| TEB310P | |
| Power supply | 12 V DC (9-16 V DC) from TEB310AL or TEB310D |
| Absorbed current | - Standby <5 mA - Max. 40 mA with all LEDs On |
| Control panel | Touch technology. Works both with vehicle on the move ( D+ Active) and with vehicle stationary |
| Dimensions (L x H x D) | 150 x 95 x 10 mm |
| Structure | Wall bracket in PCA with screws and snap-fit + Tempered glass |
| Weight | 74 g |
| Certifications | CE, R10 |
